Off Road / All Terrain Conversion Kit

I've had this kit in my cart since it was released, and finally pulled the trigger a few weeks back...and it is totally epic. Installation was straightforward - though I initially did not get the pulley on one wheel installed evenly, which was obvious once I rode it. The wider, traditional-style trucks coupled with the larger pneumatic tires make this setup rock-solid stable (eg, it's immediately comfortable to pin the throttle to top speed...and cruise once you get there). There is some vibration from the inherently unbalanced setup (small diameter wheels with comparatively large, heavy valve stems + caps) that doesn't really appear to cause any issues (but is a minor annoyance that can likely be minimized by a small bit of balancing effort with stick-on weights). Somewhat surprisingly, the biggest issue I have seems to be getting all four tires inflated to the same pressure - the tires hold such a small volume of air that they seem incredibly sensitive to your technique in disconnecting the inflator. Range...suffers, especially if your tires are under inflated while exercising a particularly heavy thumb. Maneuverability likewise is reduced a non-insignificant amount (this is the primary reason I swapped to the deck in the pics - the much steeper/longer tail helps this a ton). What I didn't expect, is that aside from a bit of added bulk, the board doesn't feel any less portable (and the ability to stand on the relocated motor (covers, that is) is a pretty cool party trick). Oh, while the tires are quieter than urethane, the new belt + pulley setup absolutely screams on my board above maybe 5mph. Super fun upgrade all around! (Since I didn't see it listed anywhere else, repairing your remote and updating the wheels to 150mm and changing the gear ratio to 4.0 (60/15) will get the speedometer fairly close to accurate).

Slight wobble but I have had this with other ATs and does not affect the ride at all. Makes my board more usable during the autumn. Came with extra belts and one spare tube plus many extra bolts and nuts for everything.

Great so far! Really makes the rough roads a lot more comfortable. Seems to handle and track fine also. Seems to be a great upgrade!

Should not have trucks in picture or say it includes 9.5" trucks as you be disappointed when you complain and told it doesn't come with them?

Delivery to NZ is alright around 2 weeks or less. Product is really good it fits my Sort off DIY board based from onsra black carve 1 parts and deck swap to 40 inch cruiser long board with kicktail Aiden was kind to help me check if it could fit and it fits!!! Costumer service is really great!! About the trucks it is really good and removed the wobble of death that is typical to Onsra BC1, I just tested it for about a week now, it took sometime because I installed it along my suspension baseplate DIY modified from aliexpress to lift the board. About the wheels it kinda reduce some road vibration (NZ roads are shitty) compare to the stock Onsra BC1 About the torque, it is kinda less maybe I will try if I could get a 66T pulley the one included is a 60T pulley and I am big and heavy rider 120kg and 182cm. Looking to change ESC and Motor. I will ask Aiden of its possible with my batteries. Overall product is really good, I am satisfied. As well as communicating with Aiden he is very helpful. I am just hesitant to buy a whole bnew board cause I'm a new rider and it will too 6months to ship to NZ for a whole board. But if I will do my first choice is Tynee I will add photos over the weekend

Shortboard + offroad = ridiculously fun! After 500km on cloudwheels I upgraded my Mini3 Pro to offroad and I love it! 1. Setup I expected a basic wheel & truck replacement, but it was more than that. The motors are now repositioned to the tail and placed higher above the ground (no more scratching on pebbles & stones!). They also got a cool protective cage. All parts came pre-assembled so it was clear what goes where. The board is a bit heavier now, but still easy to carry. 2. Impressions (after ~50km) The deck is now higher above the ground so it feels a bit different (became natural quite fast). The ride is incredibly smooth - no more slowing down before every crack on the pavement! It's also very quiet (I can only hear the motors, it's silent event when going through the cracks). Wherever cloudwheel struggled - grass, small pebbles, cobblestone - I can go without any problem now. And even beyond that. The board is now more stable and it does encourage higher speeds even on sketchy surfaces. That means more intense battery usage, but it's totally worth it :) 3. Drawbacks Turning radius got wider - I was expecting that Kicktail is harder to use - the motor cage goes a bit beond the kicktail outline, so I can't just step on it to grab the front trucks; pivoting is also harder, but still doable - I'm actually doing it more often now to help with tight turns. Those are minor things though compared to all the fun and new areas unlocked! 4. Overall opinion If you like riding natural trails - I totally recommend it! It's a new level of pleasure now, incredibly smooth and stable ride and no more anxiety about scratching the motors. PS. I was playing around with adjusting the controller after upgrade and here's what I figured out: - 1 wheel rotation = 4 motor rotations (measured experimentally), so I set the ratio to 4.0 - wheel size = 150mm It feels about right when riding and looking at the speed on the controller :) Combining the numbers (ratio/wheel size): 4/1.5 = ~2.67 which is quite similar to the old value ~2.4-2.5

Get the airless tires if you dont want to deal with flats! I already had to replace the original with the 2 extra they provided and now bought 4 more which I dont think will last long! Totally regret the getting the airless.

I put 900 miles on my Mini 2 with Hydro Wheels before using the all terrain conversion. I ride 6 miles almost everyday to and from work in the city. What's great about the AT conversion on the mini is that it retains the portability of the board while smoothing out the cracks and bumps of the city streets. The one thing I was concerned about was a loss of speed but Aiden helped me adjust the drive ratio to get some speed back after the conversion. I think it goes just as fast or just a few mph slower than before the conversion which is plenty. Happy to not walk into the office or get back home with numb legs anymore lol. Awesome kit from Tynee and the support from Aiden and the team is unparalleled!

So far the best purchase in 2023, keep up the good work Tynee team!!!

I am able to enjoy wider range of places to ride and doing so in total comfort! I'm hooked . This has been a satisfying purchase

Lycaon parts, Eovan carbon deck and Tynee 6"AT kit is a match made in heaven!

Kit for ultra I bought this kit for my tynee ultra and I go everywhere with it. in distance I lose between 5 and 7km compared to the original wheels.